WELCOME TO FURNACE TIPS
Practical Furnace Repair Tips
All homeowners should be aware of these furnace repair tips.
The perfect time to schedule a much-needed furnace repair and maintenance as well as to address other heating related problems is during summer. And that is perhaps the best furnace repair tip you can get and share with everyone. The primary reason is that furnace technicians are more accessible this time of the year, and you no longer have to wait for long because not many people require their services. Also, it’s cheaper too since they often offer discounts since it is an off-peak season. And most of all, doing preventive furnace maintenance is definitely way better than having to do furnace repairs in the midst of winter.
During summer, contractors are more than willing to do furnace repair and maintenance since business is slow. With proper and regular maintenance, you can extend the life of your furnace for several more years.
Important Furnace Repair Tips
It is dangerous to have a furnace that doesn’t work at its best. The natural byproduct of partial combustion, and a truly deadly gas at that is carbon monoxide. Almost all gas furnaces produce carbon monoxide. They are often delivered to your furnace’s venting so as not to put your health at risk. If you have an efficient gas furnace, carbon monoxide should be the least of your worries. But if your furnace often breaks down and experience many other furnace issues from time to time, it is likely that it generates this colorless, odorless and deadly carbon monoxide without you knowing, leaving you and your family confused, disoriented, and even die from it.
The experts suggest having your furnace inspected and cleaned every year. As your furnace gets older, it is more crucial not to miss on these routine checks and cleaning. Most new furnaces out in the market have built-in features allowing the furnace to shut off once a problem is detected. You don’t have that among older furnace models. Over time, they can develop into small cracks in your furnace’s combustion chamber. You may not see it right away, but these minute cracks can leak carbon monoxide inside your homes.
Changing furnace filters regularly is likewise vital. You can often find the furnace filter inside the front panel. At times, it may have a separate access door. You can achieve an efficiently working furnace by having clean filters that will trap dirt and dust from circulating in the house. Ordinary homeowners can change filters on their own, but if you’re not confident enough, you can always call an expert for help.
The following furnace repair tips can help your furnace work efficiently for a long time and minimize unexpected furnace problems that will call for a costly repair:
• Make sure the area around the furnace remains clear and clean all the time.
• Keep a clean burner area.
• Hire an expert to oil all of the furnace’s moving parts yearly.
• Don’t put anything combustible anywhere within six inches of the vent pipe.
• Refrain from putting anything that can block 20% of your home’s registers. It can lead to high resistance and unnecessary heat buildup in a furnace.
• Never store combustible items like gasoline, paint thinner, etc. near the furnace.
A furnace is a major home investment. You spend lots of money in acquiring one, and in having it installed because you value your family’s safety, comfort and convenience once the outside temperature starts to plummet. Make sure to maintain it regularly to maximize its lifespan and avoid costly furnace problems that could’ve been avoided if you just practice routine inspection and maintenance. Hire a licensed, certified, and fully-bonded and insured cooling contractor to do the job for you. Observe the furnace repair tips mentioned above and you’re all set for the next heating season. Here's how to make furnace emergencies bearable http://furnace-repair-edmonton.ca/.
Common Residential Furnace Problems
One of the best things that were ever designed for a home is HVAC units. These systems heat and cool a home in a rapid manner and are very easy and convenient to use. They use forced air as the means of transporting the heated and cooled air so they also tend to fill rooms completely and keep the air in a home from getting stagnant. They are designed to last a long time but that does not mean they are trouble free. Here is a list of some of the more common residential furnace problems .
1. Blower Unit Failure
The blower motors on HVAC units run constantly during the warmer and colder months of the year so it no wonder they are listed under the more common residential furnace problems that a homeowner may encounter. They also tend to be located in attics, basements, garages and other areas that collect a lot of dust. A furnace cannot run if its blower unit fails so it must be repaired or replaced right away if this happens.
2. Control Failure
Obviously when a control fails on a home furnace chances are the system will not run properly or may not come on at all. It could fail because of such things as a thermostat on the control board going bad or something simpler like a broken activator switch. Either way these must be repaired because you certainly don’t ever want to be without heat during the coldest months of the winter.
3. Burner Tray Failure
There are perhaps no more common residential furnace problems than those associated with the burner tray. These are constantly being subjected to expansion and contraction during heat cycles which will weaken the metal over time and they also are subjected to a lot of carbon buildup. Even cleaning does not always get them working properly and this can make the furnace run very inefficiently or not come on at all. A burner tray is too important to the proper working of the furnace so it is best to have it repaired or replaced as quickly as possible when there are problems with it.
4. Electrical Switches
Just because a furnace runs on natural gas, propane or oil does not mean that there is no electricity going to it. Parts such as the controls, blower motor and electronic ignition all need electricity to do their function in an HVAC system. These are controlled by a series of switches that allow each device to come on when it is called for. Over time the action of the switches coming on and off will produce some carbon buildup and this may even cause the metal contacts to melt after a while. These are examples of other vital parts in a home furnace that should be replaced immediately when there are signs that one of these is starting to fail.
Yes it’s true that home furnaces last a very long time between major repairs but that does not mean they are impervious to having one of these types of residential furnace problems arise every so often. And more on furnace repairs frequently asked questions http://plumbers-edmonton.ca/.
The 9 Vital Gas Furnace Parts
Do you have an idea what are the essential gas furnace parts? You’ll soon learn about the key furnace terminologies and various definitions that can enlighten you and help you better understand the various gas furnace parts and the way it works. Basically, your furnace has four types. You have gas, oil, dual fuel and electric. Even if there are different kinds of furnace, many heating systems, such as a gas furnace, work the same way. They have the same fundamental functions as well as mechanisms that deliver heat to your house.
Return Ducts: These ducts get the cooled air from inside your home and then take it back to your furnace so that it can go through the process once more to be heated up again and redistributed throughout your home.
Air Filter: When the furnace pulls air from the return ducts, its air filter is situated just before the blower motor to capture dust, any particles, and other debris in the air. It is there primarily for two reasons, firstly, it safeguards your furnace motor and then improve the quality of air in your home by getting rid of various allergens and pollutants.
Blower Motor: It is an electric motor that has a fan in position to evenly distribute a supply of air current into the furnace. It is a forced movement that forces the air to the heat exchanger (warms the air) and go to the supply plenum that supplies the warm air throughout your home.
Thermostat: This gauge measures your home’s temperature. It will tell the ignitor when it must turn on to initiate the heating process.
Hot Surface Ignitor: Once your furnace gets a signal coming from the thermostat that it must start working, it issues an electrical current to your ignitor that will in turn become red hot so that the burner lights up when it starts.
Burners: Once a furnace gets the thermostat’s signal for it to turn on, fuel is delivered to the burners that are in turn ignited by the incredibly hot surface ignitor. It generates an even and controlled flame that furnished heat to the unit’s heat exchanger.
Heat Exchanger: Among all the gas furnace parts, the heat exchanger is the one that ultimately deals with the generated heat. It is the first spot where combustion gasses enter once they’ve been generated by the burners. And when these combustion gasses are within the chamber of the heat exchanger, the gasses’ heat are absorbed by the metal walls. Inside the chamber, these combustion gasses are now cooled and released by the draft inducer blower into a pipe and carefully discharged from your home. While this action takes place, the blower motor pushes the air from within your home out of the heat exchanger without first absorbing heat from its walls and go into the plenum supply ducts to give you a warm and comfortable home.
You must also remember that this is the specific gas furnace part that deals with the deadly carbon monoxide. It is why you must arrange for the heat exchanger to be checked by a professional on a yearly basis to prevent the likelihood of having carbon monoxide leaks in your house. As the years go by, cracks can appear inside the heat exchanger that is responsible for the leak that can endanger you and your family’s life.
Flue: It is otherwise known as the exhaust stack. The flue is where all your waste exhaust is brought to. It is made up of fuel combustion from the gas furnace including carbon monoxide. In some houses, the exhaust can have the filter directed toward the chimney while some have it brought out of the house via a vent or a pipe. For those who aren’t aware yet, there is no flue in electric furnaces.
Supply Plenum: It is the duct connected to your reliable furnace that delivers the warm air all over your home. By now, you start seeing your furnace in a different light. And hopefully, it may have taught you what you needed to know to handle better unexpected furnace emergencies. Learn how to save on home energy and breath easier.
How to Install a Programmable Thermostat
You can easily pull off the installation of a new HVAC thermostat. Best of all, one can enjoy big savings by consuming less energy. Whether or not you must change an old faulty HVAC thermostat or just want to upgrade to a modern and more efficient one, it is an inexpensive and swift project.
A programmable HVAC thermostat allows you to pre-set the temperature you want to heat or cool your house at a low cost. Instead of having to turn on the furnace or the AC once your thermostat reaches the pre-set temperature, a programmable HVAC thermostat likewise allows you to pre-set the temperature on a specific time of day. There are even seven-day variants that allow you to pre-set differing schedules for every single day of the week. It lets you pre-set a cool and comfortable temperature as you sleep and a different temperature when nobody is inside the house. If you want to find out more info regarding thermostat selection, just keep on reading.
It is pretty easy to replace an HVAC thermostat. Most of the time, you can do it in as fast as 15 minutes with the help of a screwdriver.
New Programmable HVAC Thermostat Installation
Shut off the power at your furnace’s circuit breaker. Take off your old HVAC thermostat’s cover plate. Bear in mind the kind of wires and to which terminals they are connected to. It is a great idea to take a picture of it just to make sure. Disconnect these wires from your HVAC thermostat and don’t forget to secure them after, so they do not fall within the wall. Use a clothes pin to clip the wires. A big paper clip will also do. Then, unscrew the HVAC thermostat from your wall and take it off.
An HVAC thermostat’s installation often varies depending on the manufacturer’s instruction. In here, you’ll come across the general steps to install one but remember to heed the specific instructions that come along your new HVAC thermostat.
Run the wires across your new thermostat’s base plate and secure the wires with a clothes pin once more. Use one screw to secure its base to the wall. If you do not have a level with you, just make sure it is tight enough to hold the HVAC thermostat in place. Take a few steps back and check if you still need to make adjustments so that it is level. After making the necessary adjustments, take a step back once more. If it looks okay, secure the other screws.
Your old HVAC thermostat must have labels for every terminal. If it were manufactured during or after the year 1973, its labels should appear the same as your new thermostat. Just install the corresponding wires to their specific terminals on your replacement thermostat.
Standard Terminal Labels for the Thermostats Produced in 1973 or After
R: Red – Hot part of the transformer. RC for cool and RH for heat
W: White – Heat control
W2: Pink or another Color – Second stage of heat
Y2: Pink or Blue – Second compressor stage of cool
C or X: Black – The common part of the transformer (24 V)
Y: Yellow – Compressor activity
G: Green – Fan
O: Orange – Energizes a heat pump to cool
L: Brown, Tan, Blue or Gray – Service indicator lamp
X2 – Brown, Blue, Tan or Gray – Second stage of heat (electric)
B: Blue or Orange – Energize to heat
B or X: Brown, Black or Black – The common part of a transformer
E: Pink, Blue, Tan or Gray – A heat pump’s emergency heat relay
T: Tan or Gray – Outdoor anticipator reset
If you have any concerns regarding the wiring, remember to take note of the colors of the wire and compare which color connects to the boiler, furnace, air conditioner or heat pump. Seek a professional’s help or the manufacturer of your thermostat in case the information mentioned above was not of help to you.
Put the cover back on the base. Turn it on and restore the power to your system at its circuit breaker. Proceed to test the heat by turning on your thermostat’s heat and listen to make sure your furnace starts and test for warm air. Also, do the same thing with your AC. However, remember that you must not run your AC when the temperature outside your home is below 65 degrees. Conclude the test as soon as you determine that the system works.
Now, set your desired temperature on the thermostat along with the specific time it will start working and then you’re finished. Average homeowners can follow these steps but never hesitate to ask for the help of experts if problems arise, or if you cannot figure out how to proceed with a particular step.
The Primary Benefits of a Gas Furnace Installation
With the passing of the season and the colder months looming on the horizon, homeowners are starting to feel the cold breeze. It makes them wonder if they are indeed ready for the cool months ahead. People now start discussing furnace efficiency and how much homeowners spend to heat up their home. Hence, these discussions inevitably talk about whether a gas furnace installation is way better than the ones powered by oil.
If you are interesting in purchasing a gas furnace, check out the pros and cons at http://air-conditioning-edmonton.ca
There are certain homeowners who argue that oil is better while others rave that there’s no better way to heat homes than with natural gas. Now, to better understand whether you should opt for a gas furnace installation or an oil-powered one, let’s go over the various pros and cons to help you make the best choice for your home.
Now as you consider your options and still looking at the wide array of furnaces out in the market today, the first consideration and the first thing you also have to look for in a furnace is its Annual Fuel Utilization Efficiency (AFUE) rating. This rating will tell you an equipment’s combustion efficiency, and a higher rating likewise indicates a higher efficiency.
For oil furnaces, their AFUE ratings are around 80% up to 90%. For gas furnaces, the numbers are higher with their average furnace ratings at 89% up to 98%. Even if gas furnaces are considerably more efficient in contrast to oil furnaces, homeowners have to pay a hefty price to own one since these units are often 10% up to 25% more costly than its oil furnace counterparts. But the best thing is that whether it be a gas or oil furnace, modern units manufactured nowadays are undeniably more efficient that older models produced a decade or more ago. For some of them, the efficiency difference is as much as 30%.
And talking about fuel costs, it becomes more obvious that homeowners can have bigger savings if they go for a gas furnace installation. According to the U.S. Energy Information Administration, regular households spent around $690 for the entire season to heat up their home back in Winter 2012. But if you own an oil furnace, this expenditure can reach into the thousands, as much as $2,558. Let us also consider those homeowners who rely on propane and spend $1,448 that season. And lastly, those people who favor electricity spends around $964, which is still lower than either oil or propane.
Moreover, the price of oil in the market is not stable. It depends on the global supply and demand, unlike natural gas reserves that are plenty in North America. And maybe because of its easy access, as much as 50% of homes in America today uses gas and only 18% relies on oil.
Now, to make things easier for you, just check out the subsequent pros and cons of each furnace type. It can help you decide whether to go for a gas furnace installation or the other way around.
- An oil furnace gives off more heat for every BTU compared to another heating source. However, one must secure an on-site storage tank aside from also making arrangements for the oil’s delivery.
- An oil furnace can be constantly and easily maintained by the company that delivers the oil (secure a service contract first). However, it is more costly to maintain because of soot and dirt buildup, regular cleaning of the chimneys as well as replacement of the oil filters.
- An oil furnace is less pricey than a gas furnace. However, it is likewise less efficient, and the price of oil can be higher than that of gas.
- A natural gas furnace has a higher heating efficiency and fuel cost is also cheaper. However, you must be living in a place that already has an existing gas supply.
- A natural gas furnace requires minimal maintenance, and you don’t even need a service contract. However, gas offers you less heat for every BTU in contrast to oil.
- A natural gas furnace is cleaner and quieter but is generally more costly than oil furnaces.
So whether you go for a gas furnace installation or that of oil, consult with a reliable HVAC contractor and procure at least three quotes before deciding on what to buy for your home. Homeowners who finally decide to make an upgrade on their system can often avail of both private and public financing incentives and rebates, so choose wisely and exhaust all means before choosing the one that will work best for your home.